Instructions

Instructions

• Brush your teeth and rinse your mouth.
• Dry the tooth with a cotton roll.
• Place a cotton roll under the lip to keep the tooth dry.
• Put the etching gel on a cotton roll using the back of the microbrush and clean your tooth.
• Apply the UV bonding fluid to the tooth using the microbrush.
• Pick up the gem with the wax pencil, stone face up. Gently press the flat end onto the tooth.
• Hold the UV light on the tooth for 4 minutes to cure the resin.
• Ensure the UV light is held close to the tooth.
• The tooth gem should now be successfully applied.

Tips for Making Your Gems Last Longer

• After applying the gem, use the micro brush with bonding resin to coat the area around the gem. Cure it again with UV light for an additional 4 minutes. This will enhance the longevity of the gem.
• Ensure your tooth is clean and dry. A thorough application of cleansing gel creates a stronger base, increasing the longevity.
• While we recommend a 4-minute UV light exposure, consider extending it for a few extra minutes to achieve an even stronger bond.

If you have any further questions, feel free to contact us via email at moonrock@moonrockgems.com or send us a direct message on Instagram @moonrockgem.

Here is short video

https://cdn.shopify.com/videos/c/o/v/af715a0a42004b32b1e1b1044ea92266.mp4